McCall, T. G., & Fuller, S. (2018). Manufacturability and the Product Design: Case Study Exploration of Manufacturability Assessments across a Product Life Cycle. 2018 International Annual Conference of the American Society for Engineering Management. Coeur d'Alene, ID.

McCall, T. G., Walden, C., & Dalton, L. (2017). Enhancing the Manufacturability Methodology for Evaluating Product Designs with a Pilot Case Study. 2017 International Annual Conference of the American Society for Engineering Management. Huntsville, AL. [Abstract]

McCall, T. G., & Fuller, S. (2018). Manufacturability and the Product Design: Case Study Exploration Of Manufacturability Assessments Across a Product Life Cycle. Proceedings of the American Society for Engineering Management 2018 International Annual Conference. Coeur d'Alene, Idaho. [Document]

McCall, T. G., Fuller, S., Dalton, L., & Walden, C. (2017). Manufacturability Assessment Knowledge-Based Evaluation (MAKE) and a Pilot Case Study. Proceedings of the American Society for Engineering Management 2017 International Annual Conference. Huntsville, AL. [Document]

Dalton, L., McCall, T. G., & Walden, C. (2016). Introduction to the Development of a Manufacturability Assessment Methodology. Proceedings of the American Society for Engineering Management 2016 International Conference. Concord, NC. [Abstract] [Document]

McCall, T. G., Walden, C., Gedik, R., Dalton, L., Watson, T. N., Dennis, G., & Burt, J. (2016). Taxonomy Based Assessment Methodology: Improving the Manufacturability of a Product Design. Proceedings of the 2016 Industrial and Systems Engineering Research Conference. Anaheim, CA. [Abstract] [Document]

McCall, T. G., Dalton, L., Fuller, S., Watson, T. N., Wall, E. S., Campbell, S., Smith, B. K., Dennis, G., & Walden, C. (2018). Developments of the Manufacturability Assessment Knowledge-based Evaluation (MAKE) and Application to Case Studies. Mississippi State University: Mississippi State University, Center for Advanced Vehicular Systems Extension.

McCall, T. G., Walden, C., Dalton, L., Watson, T. N., Fuller, S., Dennis, G., Wall, E. S., & Storey, J. K. (2017). Enhancements to the Manufacturability Knowledge-based Evaluation (MAKE) and a Pilot Case Study. Mississippi State University: Mississippi State University, Center for Advanced Vehicular Systems Extension.

McCall, T. G., Walden, C., Dalton, L., & Dennis, G. (2015). Manufacturability Assessment Methodology for Reducing Life Cycle Costs. U.S. Army Corps of Engineering, Vicksburg, MS: Engineering Research and Development Center. [Abstract]

Fuller, S., McCall, T. G., Wall, E. S., Falls, T. C., Dalton, L., & Dennis, G. (2018). Manufacturability Assessment Knowledge-based Evaluation. Nashville, TN. [Abstract]

McCall, T. G. (2018). Nissan Process Failure Modes and Effects Analysis (PFMEA). Canton, MS: CAVS Extension, Mississippi State University.

McCall, T. G. (2018). Nissan 8D - Root Cause Problem Solving. Canton, MS: CAVS Extension, Mississippi State University.

McCall, T. G., & Fuller, S. (2018). Manufacturability and the Product Design: Case Study Exploration of Manufacturability Assessments Across a Product Life Cycle Presentation. Proceedings of the American Society for Engineering Management 2018 International Annual Conference. Coeur d'Alene, Idaho.

McCall, T. G. (2018). Nissan 8D/QC Story Problem Solving. Canton, MS: CAVS Extension, Mississippi State University.

McCall, T. G. (2018). Nissan 8D/QC Story Problem Solving. Canton, MS: CAVS Extension, Mississippi State University.

McCall, T. G. (2018). Manufacturability Interim Program Review. MSU & ERDC. Canton, MS: MSU CAVS Extension, Mississippi State University.

McCall, T. G. (2018). Process Failure Modes and Effects Analysis (PFMEA) & Control Plans. Biloxi, MS: MSU CREC, CAVS Extension, Mississippi State University.

McCall, T. G. (2018). 8D Root Cause Problem Solving. Biloxi, MS: MSU CREC, CAVS Extension, Mississippi State University.

McCall, T. G. (2018). 8D Root Cause Problem Solving. Grenada, MS (ICE Industries): CAVS Extension, Mississippi State University.

McCall, T. G., & Dennis, G. (2018). Nissan Process Failure Modes and Effects Analysis (PFMEA). Canton, MS: CAVS Extension, Mississippi State University.

McCall, T. G., & Dennis, G. (2018). Design for Manufacturing and Assembly Overview. Griffin Inc. Byhalia, MS.: MSU - CAVS Extension. [Abstract]

McCall, T. G. (2018). Toyota Heater Barn Project Update. Blue Springs, MS: TMMMS & MSU CAVS Extension.

McCall, T. G., Fuller, S., & Dalton, L. (2018). Speedbox Review. Canton, MS: MSU CAVS Extension.

McCall, T. G., Dalton, L., & Fuller, S. (2017). Manufacturability Assessment Overview. Mississippi State University: MSU CAVS Extension. [Abstract]

McCall, T. G., & Dennis, G. (2017). Toyota Project Update - Chassis Rail and Heater Barn. Starkville, MS, Mississippi State University: CAVS Extension.

McCall, T. G., & Fuller, S. (2017). Manufacturability Assessment Knowledge-Based Evaluation (MAKE) and a Pilot Case Study. Proceedings of the American Society for Engineering Management 2017 International Annual Conference. Huntsville, AL.

McCall, T. G. (2017). Manufacturability (MAKE) Review. ERDC, Vicksburg, MS: CAVS Extension.

McCall, T. G., & Dalton, L. (2017). Manufacturability (MAKE) Overview to Digital Manufacturing Working Group. Starkville, MS.

McCall, T. G., & Dennis, G. (2017). 8D Root Cause Problem Solving. Canton, MS: CAVS Extension.

McCall, T. G., & Dennis, G. (2017). Nissan 8D/QC Story Problem Solving. Canton, MS: CAVS Extension.

McCall, T. G. (2017). 8D Root Cause Problem Solving for Nissan Interns. Canton, MS: CAVS Extension, Mississippi State University.

Dennis, G., & McCall, T. G. (2017). Nissan 8D - Root Cause Problem Solving. Canton, MS. CAVS Extension; Mississippi State University.

Dennis, G., & McCall, T. G. (2017). Nissan Process Failure Modes and Effects Analysis (PFMEA) - Control Plan. Canton, MS. CAVS Extension; Mississippi State University.

Dennis, G., & McCall, T. G. (2017). Process Failure Modes and Effects Analysis (PFMEA) - Control Plan. Biloxi, MS; MSU CREC: CAVS Extension, Mississippi State University.

Dennis, G., & McCall, T. G. (2017). 8D Root Cause Problem Solving. Biloxi, MS; MSU CREC: CAVS Extension, Mississippi State University.

Dennis, G., McCall, T. G., & Bowen, R. (2016). Nissan Firewall Containment. CAVSE, Canton, MS.. [Abstract]

McCall, T. G., Wall, E. S., & Dalton, L. (2016). Development of a Manufacturability Assessment Methodology and Metric. Defense Manufacturing Conference Proceedings. Denver, CO: Defense Manufacturing Conference. [Document]

McCall, T. G., Dalton, L., & Walden, C. (2016). Manufacturability Assessment Knowledge-based Evaluation (MAKE). Manufacturing Readiness Level (MRL) Working Group Quarterly Meeting. Arlington, VA. [Document]

Dennis, G., & McCall, T. G. (2016). 8D Root Cause Problem Solving. CAVSE, Canton, MS..

Dennis, G., & McCall, T. G. (2016). Process Failure Modes and Effects Analysis. CAVSE, Canton, MS..

Dennis, G., & McCall, T. G. (2016). Nissan Problem Solving and 8D Training. MartinRea; Tupelo, MS. [Abstract]

Dennis, G., & McCall, T. G. (2016). Nissan Problem Solving and 8D Training. CAVS Extension.

Dennis, G., McCall, T. G., & Fuller, S. (2016). 8D Root Cause Problem Solving for Weyerhaeuser. 8D Root Cause Problem Solving; Starkville, MS.; Mississippi State University. [Abstract]

Dennis, G., Curtis, J., & McCall, T. G. (2016). Plant Master Planning - Pain and Energy Reduction Case Study. 2016 EnHance Annual Workshop; Marriott Hotel - Jackson, MS.. [Abstract]