Mamun, A. A., Bappy, M. M., Senanayaka, A., Li, J., Jiang, Z., Tian, Z., Fuller, S., Falls, T. C., Bian, L., & Tian, W. (2023). Multi-channel Sensor Fusion for Real-time Bearing Fault Diagnosis by Frequency-domain Multilinear Principal Component Analysis. The International Journal of Advanced Manufacturing Technology. Springer London. 124(3), 1321-1334. DOI:https://doi.org/10.1007/s00170-022-10525-4.

Senanayaka, A., Mamun, A. A., Bond, G., Tian, W., Wang, H., Fuller, S., Falls, T. C., Rahimi, S., & Bian, L. (2022). Similarity-based Multi-source Transfer Learning Approach for Time Series Classification. International Journal of Prognostics and Health Management. 13(2), 1-25. DOI:https://doi.org/10.36001/ijphm.2022.v13i2.3267. [Document Site]

McCall, T. G., & Fuller, S. (2018). Manufacturability and the Product Design: Case Study Exploration of Manufacturability Assessments across a Product Life Cycle. 2018 International Annual Conference of the American Society for Engineering Management. Coeur d'Alene, ID.

Carruth, D. W., Walden, C., Goodin, C., & Fuller, S. (2022). Challenges in Low Infrastructure and Off-Road Automated Driving. 2022 Fifth International Conference on Connected and Autonomous Driving (MetroCAD). Detroit, MI, USA. 13-20. DOI:10.1109/MetroCAD56305.2022.00008. [Abstract] [Document Site]

McCall, T. G., & Fuller, S. (2018). Manufacturability and the Product Design: Case Study Exploration Of Manufacturability Assessments Across a Product Life Cycle. Proceedings of the American Society for Engineering Management 2018 International Annual Conference. Coeur d'Alene, Idaho. [Document]

Wall, E. S., Fuller, S., & Falls, T. C. (2018). Design of the Manufacturability Assessment Knowledge-Based Evaluation Tool. Proceedings of the American Society for Engineering Management 2018 International Annual Conference. Coeur d'Alene, Idaho. [Document]

McCall, T. G., Fuller, S., Dalton, L., & Walden, C. (2017). Manufacturability Assessment Knowledge-Based Evaluation (MAKE) and a Pilot Case Study. Proceedings of the American Society for Engineering Management 2017 International Annual Conference. Huntsville, AL. [Document]

McCall, T. G., Dalton, L., Fuller, S., Watson, T. N., Wall, E. S., Campbell, S., Smith, B. K., Dennis, G., & Walden, C. (2018). Developments of the Manufacturability Assessment Knowledge-based Evaluation (MAKE) and Application to Case Studies. Mississippi State University: Mississippi State University, Center for Advanced Vehicular Systems Extension.

McCall, T. G., Walden, C., Dalton, L., Watson, T. N., Fuller, S., Dennis, G., Wall, E. S., & Storey, J. K. (2017). Enhancements to the Manufacturability Knowledge-based Evaluation (MAKE) and a Pilot Case Study. Mississippi State University: Mississippi State University, Center for Advanced Vehicular Systems Extension.

Fuller, S., Puryear, S., & Walden, C. (2016). Port Utilization Measurement of Mississippi's Intermodal Ports. Mississippi State University: National Center for Intermodal Transportation for Economic Competitiveness. [Abstract]

Fuller, S., McCall, T. G., Wall, E. S., Falls, T. C., Dalton, L., & Dennis, G. (2018). Manufacturability Assessment Knowledge-based Evaluation. Nashville, TN. [Abstract]

Fuller, S. (2018). Statistical Process Control, Class 4. MSU CAVS-Extension, Canton, MS.

McCall, T. G., & Fuller, S. (2018). Manufacturability and the Product Design: Case Study Exploration of Manufacturability Assessments Across a Product Life Cycle Presentation. Proceedings of the American Society for Engineering Management 2018 International Annual Conference. Coeur d'Alene, Idaho.

Fuller, S. (2018). Autonomous Test Track Overview. Mississippi State University, Starkville, MS. [Abstract]

Fuller, S. (2018). Minitab for Data Driven Problem Solving, Class 2. MSU CAVS-Extension, Canton, MS.

Dennis, G., & Fuller, S. (2018). Supporting the Expanding Aviation and Automotive Industries. Appalachia Works: Expanding Opportunities for our Region’s Future Conference. Appalachia Regional Commission Conference - Tupelo, MS.: Center for Advanced Vehicular Systems - Extension.

Fuller, S. (2018). Statistical Process Control, Class 3. MSU CAVS-Extension, Canton, MS.

Fuller, S. (2018). Statistical Process Control, Class 2. MSU CAVS-Extension, Canton, MS.

Fuller, S. (2018). Minitab for Data Driven Problem Solving, Class 1. MSU CAVS-Extension, Canton, MS.

McCall, T. G., Fuller, S., & Dalton, L. (2018). Speedbox Review. Canton, MS: MSU CAVS Extension.

Fuller, S. (2018). Statistical Process Control, Class 1. MSU CAVS-Extension, Canton, MS.

McCall, T. G., Dalton, L., & Fuller, S. (2017). Manufacturability Assessment Overview. Mississippi State University: MSU CAVS Extension. [Abstract]

Fuller, S. (2017). SPC 101 - Statistical Process Control. MSU CAVS-E, Canton, MS. [Abstract]

Fuller, S. (2017). Nissan ECL SPC 101 Class 4. MSU Center for Advanced Vehicular Systems Extension, Canton MS. [Abstract]

McCall, T. G., & Fuller, S. (2017). Manufacturability Assessment Knowledge-Based Evaluation (MAKE) and a Pilot Case Study. Proceedings of the American Society for Engineering Management 2017 International Annual Conference. Huntsville, AL.

Fuller, S. (2017). Nissan ECL SPC 101 Class 3. MSU Center for Advanced Vehicular Systems Extension, Canton MS. [Abstract]

Fuller, S. (2017). Nissan ECL SPC 101 Class 2. MSU Center for Advanced Vehicular Systems Extension, Canton MS. [Abstract]

Fuller, S. (2017). NIssan SPC 101 Class 1. MSU Center for Advanced Vehicular Systems Extension, Canton MS. [Abstract]

Fuller, S., & Johnson, J. (2017). Statistical Process Control - SPC 101. Statistical Process Control; Mississippi State University Center for Advanced Vehicular Systems-Extension; Canton, MS. [Abstract]

Fuller, S. (2016). Minitab Statistical Software for Data Driven Problem Solving. Mississippi State University Center for Advanced Vehicular Systems - Extension; Canton, MS. [Abstract]

Walden, C., Fuller, S., & Johnson, J. (2016). Statistical Process Control - SPC 101. Mississippi State University Center for Advanced Vehicular Systems - Extension; Canton, MS. [Abstract]

Fuller, S., & Walden, C. (2016). Minitab Statistical Software for Data Driven Problem Solving. Mississippi State University Center for Advanced Vehicular Systems - Extension; Canton, MS. [Abstract]

Dennis, G., McCall, T. G., & Fuller, S. (2016). 8D Root Cause Problem Solving for Weyerhaeuser. 8D Root Cause Problem Solving; Starkville, MS.; Mississippi State University. [Abstract]

Fuller, S. (2016). Minitab Breakout Session. Nissan Innovation Conference; Canton, Mississippi. [Abstract]